Sometimes, the volume buttons on your Apple TV remote might stop working. This can be annoying, but don’t worry! There are a few easy steps you can try to fix the problem.
People used to do a factory resetting to get the remote functional, but over the years, there has been a much easier way to solve this issue and as tech author of Wikilytech, I will discuss that.
5 Best Methods to Solve Apple TV Remote Volume Not Working? Here’s What to Do?
Method 1: The control center
A source from Reddit claims that the Apple TV remote volume can be reset through the following stages :
- Step 1: Take hold of the Apple TV remote press the control center button and then simultaneously press the volume down. The button needs to be pressed for 5 seconds. After this move on to step 2.
- Step 2: Now slowly release all the buttons and wait for the message “ connection lost “. This message will be displayed on the TV screen.
- Step 3: After this message your remote will restart automatically and the connection notification will reappear. You can now use the remote.
Method 2: Remote charging
Your Siri or Apple remote might be out of charge. Recharge the remote for 30 minutes to check if the remote is working, if not try replacing the battery.
Note: In countries where the virtual assistant Apple is supported, it’s called Siri Remote, and in other regions, it’s called Apple Remote.
Method 3: Physical reset
This method is very easy and all you need to do is unplug your Apple TV from the socket and wait for 30 seconds. Once done the home screen will appear again and check if your remote is working.
Method 4: Problem in Apple application
Sometimes your Apple remote might not be working since you did not update your Apple application. If you face such issues make sure you do the following :
- Make sure that your IOS device has the latest version.
- Disconnect the router, and unplug your Apple TV from the power source.
- Reconnect the TV and the router.
- Ensure that your router and the TV have the same wifi network.
Your remote problem will be solved here. If not, switch to method 5
Method 5: Manual reset and turning on HDMI
Open your Apple TV and then navigate to volume control by following this chain settings > remote and devices > volume control
- Select the option that says new device.
- Now follow the steps mentioned on the home screen to fix the remote.
- Finally, go to the menu option in the remote and make sure that HDMI CEC is turned on.
Method 6: Check the Volume Settings
First, make sure that the volume on your TV is not muted or turned down too low. You can check this by using the TV’s own remote to increase the volume. If the TV volume is working fine, then the problem might be with the Apple TV remote.
Method 7: Restart Your Apple TV
Sometimes, restarting your Apple TV can fix small problems. To do this, follow these steps:
- Go to the Apple TV home screen.
- Open the “Settings” app.
- Scroll down and select “System.”
- Choose “Restart.”
Wait for your Apple TV to restart, and then try the volume buttons again.
Method 8: Contact Apple Support
If you’ve tried everything and the volume still doesn’t work, it might be time to contact Apple Support. They can help you figure out if there’s a bigger problem with your remote or Apple TV.
Takeaway
We have laid out the entire blueprint for the question: “Is the Apple TV remote volume not working”. Using our guide you will find all the possible answers to this question. Once you’re guided with this information you will be able to hack your way to solve this issue. If you liked what we have presented, it’s best that you subscribe to our newsletter to know that you appreciate our input.